2 Inch x 10Ft E-Track 3-Point Car Hauler Straps with Rolling Idler & Three Cleats - 10,000 lbs Break Strength Over-the-Wheel Tie Down Straps for Car Trailer, Truck, UTV, ATV

First-Screen Selling Points

• Working Load Limit (WLL): 3,333 lbs (1,512 kg) per strap - the number a loading plan or insurance file can actually cite
  
• Break Strength (BF): 10,000 lbs (4,536 kg) - 10,000 / 3,333 = 3:1 design factor, stated instead of implied
  
• 2 in (50 mm) x 10 ft (3.05 m) 100% high-tenacity polyester webbing - elongation 7% or less at WLL, UV and abrasion resistant
  
• Spring-loaded E-Track fitting with rolling idler ratchet - clicks into horizontal and vertical 2" E-Track rails, no adapter needed
  
• Three molded rubber cleats and double diamond stitching - load spread across the full tread width, reinforced at every stress point
  
• Batch load tested - assembly break strength verified before shipment, batch by batch
  
• Certification, not a claim - WSTDA T-1 (3:1 design factor) practice; EN 12195-2 optional; GS and TUV documents on request
  
• Size matrix 6 / 8 / 10 / 12 ft plus alternative end fittings - one order covers a mixed trailer fleet
  
• OEM / ODM from the factory - custom webbing colors, printed logos, private labels and retail packaging; MOQ 500 pc

General Information

Commercial Terms

Quick Detail

Also Known As: Car Hauler Strap, Over‑the‑Wheel Tie Down Strap, E‑Track Wheel Strap, Auto Hauler Ratchet Strap, Tire Block Strap, 3‑Point Car Tie Down, Vehicle Transport Strap

Primary Use: Securing passenger cars, trucks, UTVs and ATVs by the wheels on enclosed car trailers, open car haulers and flatbeds

Core Specs: 2" (50mm) high‑tenacity polyester webbing, 10 ft length, 10,000 lbs (4,536 kg) assembly break strength, spring‑loaded E‑Track fitting, rolling idler, three rubber cleats

Description

The Leiao Rigging 2" x 10Ft 3‑Point E‑Track Car Hauler Strap is engineered for professional vehicle transport ‑ the kind of duty that punishes cheap straps. Whether you haul collector cars in an enclosed trailer, run a dealership delivery route, or move UTVs and ATVs on a flatbed, these straps anchor the vehicle by its tires instead of its frame, so the suspension rides naturally and the body is never stressed.

The three‑point design with three molded rubber cleats cradles the tire across its full tread width. Unlike two‑point straps that tend to slip off during hard cornering or emergency braking, the three‑point arrangement pulls evenly over the wheel and holds the tire in a fixed, repeatable position. The rolling idler sleeve at the ratchet lets the webbing run freely during tensioning, which removes the friction and heat that wear out the strap at the bend point ‑ the single most common failure location on car hauler straps.

Tensioning is handled by a wide‑handle heat‑treated carbon steel ratchet, paired with a spring‑loaded E‑Track fitting that clicks into 2" E‑Track rails in both horizontal and vertical orientations. Setup takes seconds: snap the fitting into the rail, loop the strap over the tire, and crank the handle down. The ratchet's pawl and gear are heat‑treated for positive, non‑binding engagement, so the strap releases just as smoothly as it locks.

Every strap is built from 100% high‑tenacity polyester webbing ‑ low‑stretch, UV‑resistant and abrasion‑resistant ‑ and finished with double diamond stitching at every stress point. Each batch is load‑tested and the assembly break strength is verified before shipment.

Key Features:

• Three‑point over‑the‑wheel design with three molded rubber cleats ‑ no slip, no frame contact
• Rolling idler sleeve protects the webbing at the ratchet bend and extends strap life
• 10,000 lbs (4,536 kg) assembly break strength with a 3:1 design factor
• Spring‑loaded E‑Track fitting ‑ fits both horizontal and vertical 2" E‑Track, no adapter needed
• Heat‑treated carbon steel ratchet with wide ergonomic handle for effortless tensioning
• 100% high‑tenacity polyester webbing ‑ low stretch, UV and abrasion resistant
• Double diamond stitching at all stress points
• 4‑piece kit covers a complete vehicle ‑ one strap per wheel
• Custom webbing colors, printed logos, private labels and retail packaging availabl

Applications

This 2" x 10Ft 3-point E-Track car hauler strap is engineered for:

Specifications

Load values above are factory regular specifications; the final figures are subject to the actual batch test report. Assembly break strength can be limited by the E‑Track fitting form and the anchorage point - select the strap for the working condition on site.

Available Size Options

The above are the regular specifications of the factory. Special dimensions, load grades, colors, webbing printing and joint forms can be customized (OEM/ODM).

Figure 6 - detail page screen 6: specification card and size options

Competitive Advantage

1. Purpose‑Built for Wheel‑Over Securing - Three molded rubber cleats spread the load across the tire tread instead of pinching it, and the three‑point geometry resists the strap walking off the wheel under hard braking - the failure mode buyers complain about most on two‑point car hauler straps
2. Rolling Idler Extends Strap Life - The idler sleeve lets the webbing run without abrasion at the ratchet bend point, so the strap survives far more load cycles than a bare‑bend design
3. Transparent Load Ratings - Assembly break strength and working load limit are stated separately and backed by batch load testing; the 3:1 design factor follows WSTDA T‑1 practice, so buyers can document compliance instead of trusting a marketing number
4. Direct‑Fit E‑Track Hardware - The spring‑loaded fitting clicks into both horizontal and vertical 2" E‑Track rails, so one SKU covers the most common trailer configurations on the market
5. Full Certification Portfolio - GS, TUV and EN 12195‑2 available on request for buyers who need verifiable documentation for European or regulated markets
6. Factory‑Direct Manufacturing - In‑house polyester webbing production plus controlled hardware sourcing means consistent material quality from yarn to finished assembly, at wholesale pricing without middlemen
7. One‑Stop Tie‑Down Range - Ratchet tie downs from 1" to 4", cam buckle straps, axle straps, E‑Track straps, recovery straps and wheel chocks available on combined orders

Tag

car hauler strap, e‑track car hauler strap, 3 point car tie down, over the wheel tie down strap, 10000 lbs break strength strap, 2 inch x 10 ft e‑track strap, rolling idler ratchet strap, car trailer tie down straps, auto hauler ratchet strap, tire block strap, wheel strap e‑track, vehicle transport strap, utv atv tie down, enclosed trailer car strap, 50mm e‑track lashing strap, Leiao Rigging car hauler